Инженерные абажуры для ламп

Engineering lighting projects often use clear, frosted, thick or borosilicate glass depending on light transmission, fixture structure, heat exposure, outdoor environment and protection requirements. Clear glass maximises light output; frosted glass controls glare; thick glass adds mechanical protection; borosilicate glass improves heat resistance for technical applications.

Yes. JX Lampshade can review drawings, old samples, dimensions, opening details, glass material requirements and project quantity to support custom glass shade or glass cover development. New mold development typically takes 15–25 days; samples on existing molds ship in 7–10 days.

Please provide fixture type, glass function (shade, cover, lens or protective component), dimensions (diameter and height), opening size, wall thickness, material, finish, quantity, drawing or sample photos, packaging requirement and delivery destination. The more project detail provided, the more accurately we can quote.

Borosilicate glass is often considered for heat-resistant or more technical lighting applications because it offers better thermal shock resistance than ordinary soda-lime glass. Final material selection should be confirmed according to fixture structure, wattage, operating temperature and project requirements.

Yes. For engineering projects, sample approval, dimensional tolerance confirmation, batch consistency, quality inspection and export packaging should be agreed before bulk production. Standard MOQ is 500 pcs per SKU — smaller pilot orders of 200 pcs per SKU are available for new engineering project development.

Borosilicate glass (3.3 grade) and tempered glass address different engineering demands. Borosilicate has a low thermal expansion coefficient — approximately 3.3 × 10⁻⁶/K — making it highly resistant to thermal shock from sudden temperature changes during lamp operation. It is the standard material for high-output and high-cycle fixtures such as industrial pendants, process lighting and street lanterns. Tempered glass offers four times the mechanical impact resistance of annealed glass but is more susceptible to thermal shock than borosilicate. For engineering applications combining both heat and impact risk — such as factory floor or outdoor industrial fixtures — borosilicate is generally the safer specification.

The glass shade itself does not carry an IP rating independently — IP protection is achieved by the combination of glass shade, housing and collar seal as a complete assembly. However, dimensional accuracy of the shade fitter opening directly determines whether the housing seal can achieve IP44 or IP65. JX Lampshade manufactures engineering glass covers to tight dimensional tolerances (typically ±0.5 mm on fitter diameter) so the housing manufacturer can achieve the required seal. If your fixture is rated for IP65 assembly, provide the collar and gasket specification when requesting a quotation and we will confirm the glass tolerance required.

Wall thickness for engineering glass lamp shades is determined by three factors: mechanical impact risk, thermal load and shade diameter. As a general specification guide: small covers (under 100 mm diameter) in protected indoor fixtures can use 2–3 mm wall thickness. Medium profiles (100–200 mm) for standard industrial pendants typically use 3–4 mm. Large profiles (200 mm+) or any shade in an exposed or high-traffic environment should use 4–6 mm. For explosion-proof and hazardous-location applications, wall thickness is specified per the housing manufacturer’s drawing and must be verified against the certified assembly. Send your fixture drawing with the housing’s maximum shade weight rating for a precise recommendation.

Sample development timelines for custom engineering glass lamp shades depend on the production method required. For profiles that can be produced from our existing mould library with dimensional adjustments, sample lead time is typically 7–14 working days. For profiles requiring new mould tooling — including custom flanges, non-standard collar diameters or unique cross-sections — the tooling fabrication adds 15–25 working days before the first sample can be produced. Rush sample production is available for standard profiles. After sample approval, bulk production lead time is typically 25–35 working days depending on order volume and glass type. Provide a drawing or dimensional spec to receive a precise sample timeline for your project.

JX Lampshade can provide the following documentation for engineering glass lamp shade orders: material certificates confirming glass type (borosilicate 3.3, soda-lime, tempered) and country of origin; dimensional inspection reports for fitter diameter, height and wall thickness to the agreed drawing tolerance; thermal shock test reports for borosilicate profiles subject to rapid temperature cycling; and packaging drop test reports to ISTA 2A for export shipments. For explosion-proof glass covers, the shade must be verified as part of the certified housing assembly — JX Lampshade can supply material and dimensional documentation to support the housing manufacturer’s full certification process. Specify the required documentation in your enquiry and we will confirm availability.